jsowoodproductss

Introduction

Although, it is not rocket science for knowing wood veneer you must know some facts that will help you to buy the best products available. Sometimes, we ignore the available facilities free of cost just due to lack of knowledge. If you know them in advance, you not only save some money but get quality products.

Facts about Wood veneer

Inform yourself

Working with Wood veneer is little technical and require specialized knowledge to know the things better. You should have all the information required for the best buy. Look for such dealers who first educate you for buying the veneer.

 Matching existing Veneer

Although, matching available wood veneer in the market to your existing veneer is not much easy as different veneer comes from different logs and wood variations happen due to tree variations. Getting a sample from your current veneer will be quite helpful. Match it with the available species and choose the identical logs.

Educate your customers

You can make a difference among your competitors just by guiding or educating your customers about how to buy the best veneer. You should educate them about how to buy and use them and make smarter choices. As far as wood veneer edge banding is concerned, you should look for matching of the edge banding with wood veneer to have similar colour and designs.

Veneered panel stability

The structural performance of the panel depends on the crucial dimensional stability. Even small veneer layers need back veneering to ignore warp. Use the same veneer if the side is visible or more cost-effective supportive veneer.

Give complete details

Give maximum details related to your order about wood veneers like colour, quantity, measurements and sequences. It will help you to get the desired veneer available to them. Incorrect or incomplete details may lead to delay in orders or even receiving of incorrect material too.

Edge banding is useful for covering the exposed sides of your material like particleboard, MDF and plywood. It gives the appearance of a solid and more expensive look to your furniture and also increases durability. Common Substitutes for edge banding includes moulding and frames. Edge banding can be of different types like ABS, PVC, acrylic, wood, wood veneer and melamine edge banding.

ABS 

These are edging generally used in kitchen worktops. Essentially it is a highly resistant laminate which is impact resistant, thermally resilient and mechanically resilient and it sounds boot of its ecology. ABS edging is a plastic material made edging and different from PVC edge banding. ABS is lighter composition and don’t include chlorine in it and also flame retardant.

PVC 

PVC edge banding is made of plastic material. It is most popular for melamine cabinets and pressure laminated. This edging is used for a different type of furniture. It is important to choose the right edging otherwise all your efforts will go in vain. It can be used with different patterns and colours. These bands are suitable for surfaces like PVC and melamine. Glue edge bands have glue and also offers adhesive with heat option. Whereas 3D edge bands provide a 3- look to your furniture. With Lac application and UV printing, these bands are extremely resistant to the strong chemical during cleaning.

Melamine 

This banding is made of melamine and that is why so-called melamine edge banding. To apply melamine banding, sand the edge of melamine to edge band the marks areas, give heat pressure on melamine edge banding and put your cloth iron on medium heat and work on small sections and apply throughout the board. Melamine is laminate but all the laminates are not necessarily melamine.

Burl wood veneer is a classic beauty. It is used on everything from fine furniture to automobiles. The rich brown color is frequently accented with a light coat of penetrating stain which brings out the figure in these wood veneer sheets. Walnut is one of only a handful of species that lightens with exposure to UV light. Vintage walnut furniture pieces are usually very warm in color. This lightening process can take months, years, and even decades to achieve. Besides Mahogany, Oak are also used for the purpose.

Why is it so rare:

A burl results from a tree undergoing some form of stress. It may be caused by an injury, virus or fungus. Most burls grow beneath the ground, attached to the roots as a type of malignancy that is generally not discovered until the tree dies or falls over. Such burls sometimes appear as groups of bulbous protrusions connected by a system of rope-like roots. Almost all burl wood is covered by bark, even if it is underground. Insect infestation and certain types of mold infestation are the most common causes of this condition.

Burls yield a very peculiar and highly figured wood, prized for its beauty and rarity. It is sought after by furniture makers, artists, and wood sculptors. There are a number of well-known types of burls (each from a particular species); these are highly valued and sliced into veneers for furniture, inlay in doors, picture frames, household objects, automobile interior paneling and trim, musical instruments, and wood turning.

Conclusion:-

Furniture, doors, windows and walls are often exposed to harsh climatic conditions, giving birth to the need for a highly durable surfacing material.Highly durable Burl wood veneer is one of the most durable surfacing materials; thanks to its all-weather resistance property, it can withstand extreme environmental conditions.

What is Wood Veneer?

Wood veneer is a thin layer of fine wood applied to a solid material to create a finished wood look on interior trim work. In general different types of wood veneer are available in the market such as raw wood veneer, flexible wood veneer. The thin slices of wood are typically glued onto flat panels such as doors, panel for cabinet in kitchen or bathroom and parts of furniture.

Types:

Based on backing, veneer comes in many forms depending on the application. Few of them are:

• Paper backed veneer
• Phenolic backed veneer
• Wood-on-wood veneer
• Raw wood veneer
• Laid up

Benefits of using wood veneer:

• It is more economical than using solid wood of the same species
• Wood veneer are used for premium finishes of the furniture for residential projects, hotels, offices, conference room etc
• Wood veneer are flexible sheets and can be used easily on curved surfaces and rounded corners
• Veneer are considered as an environment friendly option because instead of using the big trunk a thin sheet of the bark is being used
• Wood veneer put the glossy or matte coat on top of the base furniture, making it look stylish and luxurious
• Wood veneer guards the actual furniture beneath it from the heat, liquid spills, stains and other things
• For outdoor or in interior veneer is moisture resistant and therefore the stability of materials made from veneer develop
• As veneer is made of thin layers of wood glued together, the chances of cracking or splitting are reduced compared to wood.
• Wood veneers provide aesthetics like natural wood which cost much less compared to natural wood
• Unlike laminates wood veneer are natural products and are generally non-toxic. The adhesives used in veneer won’t come off easily

Wood veneers are one of the trending furniture crafting industry today, so you can always give a classy look to your furniture.